CE
0.18 MB
TARDIGRADE EPST 110 EPOXY BASED, TWO-COMPONENT SOLVENT-FREE PRIMER
TARDIGRADE EPST 110 EPOXY BASED, TWO-COMPONENT SOLVENT-FREE PRIMER
Tardigrade EPST 110 is an epoxy based, two component, low viscosity, solvent free primer and impregnation material.
PRODUCT FEATURES
TECHNICIAL SPECIFICATIONS
All technical values are calculated at +23°C and 50% relative humidity. Changes in temperature and humidity change the technical values.
Intensity
Mixture Density: 1.08 kg/liter (3%)
Viscosity
Mixture: 300-600 mPa.s
Shore D Hardness
7 days: 75-85 (ASTM D2240-05)
Compression Strength
28 days: > 95 N/mm² (ASTM D695-10)
Training Strength
7 days: >30 N/mm² (ASTM D790)
Wear Resistance
7 days: >3 N/mm² (Concrete) (ASTM D7234)
Abrasion Resistance
7 days:< 20 mg (CS 10/1000/1000) (ASTM D4060-14)
Remaining Usage Time After Counter
30-50 minutes
Full Cure Time
7 days
- DEFINITION
- USAGE AREAS
- STORAGE
- DOCUMENTS
PACKAGING:
Component A: 13.60 kg.net: - Component B: 6.40 kg net Total Set: 20 kg.net -Total Set:22.55 kg gross
Component A: 2.72 kg.net - Component B: 1.28 kg, net Total Set: 4 kg net Total Set: 4.90 kg brut
Barrel packaging is available upon request.
Indoor and outdoor,
On concrete and cement-based mineral surfaces,
On normal and very absorbent surfaces,
Priming Tardigrade branded epoxy or polyurethane floor coverings,
Bonding of epoxy based leveling mortars and mortar coatings,
It is used as filling and repair mortar on surfaces that require repair with aggregate.
Storage:
In its unopened original package, in dry environments, protected from frost,
It should be stored between +10°C and +30°C. The products should not be overloaded in a way that will damage their packaging.
Shelf life:
Shelf life under proper storage conditions is 12 months from the date of manufacture. Products in opened packages should be stored under appropriate storage conditions and consumed within 1 week at the latest.