EPMT 140 A BİLEŞENİ GBF
0.41 MB
TARDIGRADE EPMT 140
TARDIGRADE EPMT 140
EPOXY BASED, TWO COMPONENT, MOISTURE TOLERANT, SOLVENT-FREE PRIMER
PRODUCT FEATURES
All technical values are calculated at +23°C and 50% relative humidity. Changes in temperature and humidity change the technical values.
Intensity
Mixture Density: 1.08 kg/liter (3%)
Viscosity
Mixture: 900-1300 mPo.
Shore D Hardness
7 days: 75-85 (ASTM D2240-05)
Compression Strength
28 days: >95 N/mm² (ASTM D695-10)
Flexural Strength
7 days: >30 N/mm² (ASTM D790)
Adhesion Strength
7days: >3 N/mm (Concrete) (ASTM D7234)
Abrasion Resistance
7 days: <20 mg (CS 10/1000/1000) (ASTM D4060-14)
Remaining Usage Time After Counter
45-60 minutes
Full Cure Time
7 days
- DEFINITION
- USAGE AREAS
- STORAGE
- DOCUMENTS
PACKAGING
Component A: 12 kg. net Component B: 8 kg. net
Total Set: 20 kg.net Total Set: 22,55 kg. gross
Component A: 1.80 kg. net Component B: 1.20 kg. net
Total Set: 3 kg. net Total Set: 3,90 kg. gross
Barrel packaging is available upon request.
* Indoor and outdoor,
* On concrete and cement-based mineral surfaces,
* Especially on damp surfaces,
* Priming Tardigrade branded epoxy or polyurethane floor coverings,
* Bonding of epoxy based leveling mortars and mortar coatings,
* It is used as filling and repair mortar on surfaces that require repair with aggregate.
It should be stored in its unopened original package, in a dry environment protected from frost, between +10°C and +30°C. The products should not be overloaded in a way that will damage their packaging.